Lynx L27F Installation, Care & Use

Side Burner/LPSGE Gas Hookup
B
BUILT-IN INSTALLATION J
1) Shut off gas supply at main
valve.
2)
3)
Disconnect all plumbing (if al-
ready attached) from grill and
gas supply valve.
Remove all fittings from grill
manifold.
4)
S)
6)
Install side burner into cutout
in counter top.
Connect gas supply to grill
and side burner as shown in
the figure at right for your
proper gas type.
Turn gas supply on and leak
test all connections.
CART INSTALLATION
1) Shut off gas supply at main
valve.
2)
3)
Disconnect all plumbing (if al-
ready attached) from grill and
gas supply valve.
Remove all fittings from grill
manifold.
4)
S)
6)
Install side burner onto cart
according to the directions
supplied with the cart mount-
ing kit.
Connect gas supply to grill
and side burner as shown in
the figure at right for your
proper gas type.
Turn gas supply on and leak
test all connections.
1
/
1
Natural Gas
BBQ Manifold
(_ N.G.Outlet Shuf-Off
Valve 1/2"Min
Inter Connecting
Pipe Work
_ Regula_,r_+_ / ...... _.
=7 Flex _'7P_7_%_ )
L.EARV,EW/
N ........ 1/2"Close Nipple
1/2"Tee
31e
1/2") Union (Coupler)
:112" Male-Female
./ Street Elbow
__ _ _ //---l/2"MIPFitting
/-- -- _ 1/2" OD Stainless
/ li _ Steel FJexible H°se.......
7Side B..... tt_ ..... 1/2" F[P Fitting
_J
j Side Burner or
................................................................................................................................................................................................Grill Extender
LP Gas
,-I
O
m
=E
__ High pressure flexible
hose & regulator existing
on grill
1/2"FIP x 3/8"MIP Flare
Elbow or 1/2"FIP or 1/2"
FIP x 3/8"MIP Flare
Fitting
Use regulator here for
hard-plumbed L.R hook-up
1/2"Close Nipple
1/2"Tee
pple
Union (Coupler)
1/2" Male-Female
Street Elbow
g
I
1/2" O.D.Stainless
_Steel Flexible Hose
i-- 1/2" FIP Fitting
__1/2" Male-Female
Street Elbow
i
Side Burner or
Grill Extender
L
L
F
22 B_lyNX

Lynx L27F Specifications

General

Brand	Lynx
Model	L27F
Category	Grill
Language	English