EasyManuals Logo

Lynx L36PSR-2 Care & Use Manual

Lynx L36PSR-2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
|
CARE & USE/INSTALLATION
MANUAL LIGHTING
If a burner doesn’t light after several attempts, it can be
match lit using the lighting rod stored in the drip tray.
Match-lighting your grill is done in one of three ways,
depending upon which burners are being lit.
First, make sure you’ve returned all of the control knobs
to the OFF position and have allowed 5 minutes for any
accumulated gas to dissipate before attempting to match
light a burner.
Manual Lighting Tube
Your grill features individual manual lighting tubes for all
main burners except for the right-most main burners.
Using the lighting rod, place a lit match in front of the
manual lighting tube for the burner you wish to light.
(See photo)
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob off and wait 5 minutes before attempting to light it
again. Once lit, gas will stop flowing through the manual
lighting tube.
Right-Most Main Burner
The right-most main burner does not feature a manual
lighting tube.
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate into the front slot of the
briquette tray for that burner.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob off and wait 5 minutes before attempting to light it
again.
ProSear™ 2 Burner
The ProSear™ 2 burner does not feature a manual lighting
tube.
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate and through the protec-
tive screen.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob off and wait 5 minutes before attempting to light it
again.
Lighting YOUR gRiLL ...continued
Extremely cold temperatures may cause your
ProSear™ 2 burners to light inside the burners in-
stead of outside. Once lit, if you hear a ‘whoosh-
ing’ sound, immediately turn the burner knobs
off to extinguish the flame and then immediately
re-light the burners.
COLD WEATHER WARNING:
PROPANE

Other manuals for Lynx L36PSR-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lynx L36PSR-2 and is the answer not in the manual?

Lynx L36PSR-2 Specifications

General IconGeneral
BrandLynx
ModelL36PSR-2
CategoryGrill
LanguageEnglish

Related product manuals