Swipe the ISO selection band to increase or lower the ISO.
Set the ISO using the front dial while in ISO Priority Mode or using the rear dial
while in Manual Mode*. As the dial is rotated, the ISO indicator in the Information
Bar at the bottom of the screen will change to display the current setting.
*Note that the functions assigned to the front and rear dials in the various exposure modes can
be changed (see
Settings, page XX). The default assignments are referenced here.
Setting the shutter speed
In Shutter Priority Mode and Manual Mode, set the shutter speed by tapping the
shutter speed indicator in the information bar at the bottom of the screen. A
selection band will open across the middle of the screen, with the current speed
at the center. Available shutter speeds range from 1/4000
th
of a second to 32
seconds.
[Screenshot: shutter speed selection band displayed; shutter speed indicator highlighted, displays
1/30]
Tap the shutter speed indicator to open the shutter speed selection band.
Swipe the band from right to left to increase the shutter speed, or from left to right
to lower it. Tap on any speed visible in the selection band to go directly to that
speed. Double-tap on the selection band to the initial shutter speed setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions