M/A-Com Orion - Data Lockout Mode

48
• The c (System Model) or C (Scan Model) button is
pressed.
• PTT is pressed.
• A group or system change.
• Entering phone call mode
• Entering individual call mode.
• A new emergency assignment has been received.
• PTT pressed in Public Address Mode.
• An emergency declared or cleared.
• Microphone removed from hook switch (OFF-hook).
• Receiving an individual or phone call.
• Receiving Agency, Fleet or System All Call.
• Pressing the k button to turn scan ON or OFF.
Data Lockout Mode
The data lock mode is a pre-programmed mode when the radio will not
respond to any data channel assignments and prevents receive data calls from
interrupting voice calls. Transmit data calls will still be initiated when needed
by the operator. After a pre-programmed time, the radio will respond to
receive data calls; however, the following conditions will clear the data
lockout mode:
• The c (System Model) or C (Scan Model) button is
pressed.
• Transmitting a data call.
• Changing a system.
• An emergency.
• Pressing PTT while in Public Address mode.
• Turning scan ON with the SCAN button.