60
3. Ensure that the channel is not busy by pressing the
c or C (Scan
Version) to momentarily disable any channel decoding and un-mute the
receiver or observe the unlit BSY indicator. If the Channel Busy Lockout
feature is programmed for the selected channel, the radio will not transmit
when the channel is busy.
4. Press and hold the PTT button. The TX indicator will light and a short
beep sounds (if pre-programmed) indicating that communication can
begin.
5. Release the PTT button when the transmission is complete and listen for a
reply.
6. When the communications is completed, press the pre-programmed button
to toggle the talk-around function OFF.
To Next Page
Loading...
