198-003 K Pump IFU Rev D 13
Chapter 6: Cleaning the K Pump
This chapter provides information regarding the proper cleaning of your K Pump.
Cleaning the External Case
- When cleaning your K Pump, turn off the main power switch and then disconnect from
the power source.
- Wipe down all external surface area with a cloth:
For dirt, stains, and/or dried substances - Remove by using any mild nonabrasive
cleanser. The surface may then be wiped clean with a damp cloth.
For minor scratches – Remove by using white polishing compounds.
Note: Use a short stiff-bristled brush if the substances become ingrained in the case.
Note: Avoid spraying liquid in connection portals.
To Next Page
Loading...