M.D. Resource K Pump - Getting Started; Unpacking the K Pump

198-003 K Pump IFU Rev D 7
Chapter 1: Getting Started
This chapter contains information about properly unpacking and setting up your K Pump.
 Unpacking the K Pump
- When the K Pump arrives, check the shipping box for any apparent damages (i.e., holes
in the box or a crushed top). Open the box and inspect each product.
- Inspect the K Pump for physical damage while unpacking. Contact M.D. Resource
immediately if any physical damage is observed.
- If the K Pump is for evaluation, keep the shipping box. These are needed to return the
unit.
 Removing the Product from the Shipping Box
- Remove the styrofoam placed on top of the box.
- Remove and set aside the K Pump Instructions for Use. Do not discard.
- Remove the accessories placed inside of the box.
- Remove the K Pump and plastic protective cover from the product.