31
We recommand to remove the combustion chamber out of the Mbox.
Open the door
Remove chamot stones
unscrew the bolt and nut to remove the chimney hood
Slide the combustion chamber out of the MBox.
Note:
There is a control screw under the
combustion chamber. When repla-
cing the combustion chamber, make
sure that the the control screw into
the hole in the Mbox. If necessary,
you can adjust the height of the
combustion chamber
2.3 Venus in the MBox: Installation against a wall. (take into account the ‘Full wall’ guideline)
To Next Page
