21
MSPS1200 by MACAllister
Product functions
Intended use
This plunge saw MSPS1200 is intended to cut wood and similar wood materials.
With compatible special saw blades(not provided) the plunge saw can also be used
to cut aluminum.
The plunge saw is only to be used with a specifically designed track. Installation in
a different or homemade track or workbench can cause serious accidents.
Operation
Operation of the plunge saw without track
· Before each use check the proper function of all installation fixtures of the
plunge saw and only use the saw if everything works properly.
· Attach the work piece in such way that it cannot move or bend during work.
Line the work piece respectively.
Fig. 12
Mode selection
The mode selector barrel enables fast and easy setting of the major functions
simply by rotating the mode selector (18) to the required mode of operation:
In more detail...
To Next Page
Loading...
