36
In more detail...
Power cord
If the power cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to a safety hazard.
Plug replacement
Should the fuse require replacement, it must be
This appliance is supplied with a BS1363 3 pin plug fitted with a 13 Amp fuse.
13Amp and approved to BS1362. If in doubt, consult a qualified electrician.
replaced with a fuse rated at
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral
Brown – Live
As the colours of the wire in the mains lead of this produ
ct may not correspond
with the coloured marking identifying the terminals in your plug,
proceed as
follows. The blue wire must be connected to the terminal marked with N or
coloured black. The brown wire must be connected to the terminal marked L
or coloured red.
MSPS1200 by MACAllister
Cleaning and maintenance
Fig. 28
19
To Next Page
Loading...
