Page 226
REPAIR INSTRUCTIONS
236
Figure 236 — Crankshaft Thrust Washer Installation
10. Position the lower thrust washer sections on
the center bearing cap (aluminum-faced side
toward crankshaft) and install the cap
(Figure 237). Torque the capscrews to
specification, 210 lb-ft (285 N•m), using
torque wrench J 24407, or equivalent.
5_106_00.bk Page 226 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs
https://barringtondieselclub.co.za/
To Next Page
Loading...
