REPAIR INSTRUCTIONS
Page 125
Oil Pump Removal
[219 MU]
Refer to Figure 110.
If the oil pump must be disassembled for any
reason, it will be easier to loosen the housing
cover retaining capscrews, the screen, the oil
inlet tube capscrews, the cover plate capscrews,
and the relief valve cap while the pump is still
secured in position. Do so before loosening the
three retaining capscrews.
The E-Tech™ screen for the oil inlet tube is held
in place by a steel retainer ring.
Remove the oil pump as a unit by removing three
retaining capscrews (1).
110
Figure 110 — Lubrication Oil Pump
1. Pump Mounting Capscrews
2. Capscrews
3. Capscrews, 12-Point
4. Oil Inlet (Pickup) Tube
5. Screen
6. Relief Valve Cap
7. Capscrews
8. Plate
5_106_00.bk Page 125 Friday, August 4, 2000 11:17 AM
BDC for engine manuals and specs
https://barringtondieselclub.co.za/
To Next Page
Loading...
