Do you have a question about the Mackie 808M and is the answer not in the manual?
Channels | 8 |
---|---|
Phantom Power | Yes |
Type | Powered Mixer |
EQ Bands | 3 |
Aux Sends | 2 |
USB Interface | No |
Equalizer | 3-band |
Effects | Built-in digital effects |
Microphone Preamps | 8 |
Specifies power draw under various voltage conditions without signal for 808M/808S.
Lists required DC voltage measurements for 808M/808S amplifier operation.
Describes adjusting bias voltage for optimal 808M/808S amplifier performance.
Details measuring output power and checking for clipping on 808M/808S.
Specifies power draw under various voltage conditions without signal for 406M/408M/408S.
Lists required DC voltage measurements for 406M/408M/408S amplifier operation.
Describes adjusting bias voltage for optimal 406M/408M/408S amplifier performance.
Details measuring output power and checking for clipping on 406M/408M/408S.
Illustrates the signal flow for EFX through mixer block diagrams.
Explains the function of EFX knobs and switches on the mixer's front panel.
Details the analog signals feeding into the EFX circuit board.
Shows the analog output signals from the EFX board to the mixer.
Lists the functions of each pin on the EFX board's main connector.
Provides a layout of the EFX board and lists its key integrated circuits.
Explains how CODEC and DSP process analog and digital EFX signals.
Describes the physical and signal connection between mixer and EFX boards.
Details the standard connection between mixer and amplifier boards.
Shows transformer wiring for 193 and 204 amplifier boards (J14, J10).