MACROMEDIA FLASH MX 2004 - ACTIONSCRIPT - Page 561

NetStream.onStatus 561
NetStream.onStatus
Availability
Flash Player 7.
Note: This handler is also supported in Flash Player 6 when used with Flash Communication Server.
For more information, see your Flash Communication Server documentation.
Usage
my_ns.onStatus = function(infoObject) {
// Your code here
}
Parameters
infoObject
A parameter defined according to the status or error message. For more
information about this parameter, see “Description,” below.
Returns
Nothing.
Description
Event handler; invoked every time a status change or error is posted for the NetStream object.
If you want to respond to this event handler, you must create a function to process the
information object.
The information object has a
code property containing a string that describes the result of the
onStatus handler, and a level property containing a string that is either "Status" or "Error".
In addition to this
onStatus handler, Flash also provides a “super” function called
System.onStatus. If
onStatus is invoked for a particular object and there is no function assigned
to respond to it, Flash processes a function assigned to
System.onStatus if it exists.
The following events notify you when certain NetStream activities occur.
Code property Level property Meaning
NetStream.Buffer.Empty
Status Data is not being received quickly enough
to fill the buffer. Data flow will be
interrupted until the buffer refills, at which
time a
NetStream.Buffer.Full message
will be sent and the stream will begin
playing again.
NetStream.Buffer.Full
Status The buffer is full and the stream will begin
playing.
NetStream.Play.Start
Status Playback has started.
NetStream.Play.Stop
Status Playback has stopped.
NetStream.Play.StreamNotFound
Error The FLV passed to the play() method
can't be found.