MadMan EMS-3 User Manual

Madman EMS-3 Operating Manual Page 14
4.4 Volts Setup
Display:
Select "ON" to enable the Volts display
Label:
Enter a label to easily identify your Volts reading.
Display Max:
Select the maximum value that you want the volts bargraph to show. This can give you increased display resolution.
Display Min:
Select the minimum value that you want the volts bargraph to show. This can give you increased display resolution.
High Alarm:
This enables or disables the volts high alarm.
High Alarm:
Enter the voltage threshold for when the high alarm must be activated. Any voltage above this value will activate the
alarm.
High Caution:
Enter the voltage for the high caution. This is the lower value of the upper yellow band.
Low Caution:
Enter the voltage for the low caution. This is the upper value of the lower yellow band.
Low Alarm:
This enables or disables the volts low alarm.

MadMan EMS-3 Specifications

General

Brand	MadMan
Model	EMS-3
Category	Measuring Instruments
Language	English