Name: MadMan EMS-3
Brand: MadMan
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Madman EMS-3 Operating Manual Page 2

1 Features

 Large 1.8” high resolution 160x128, sunlight readable, wide viewing angle, 1000 cd/m2 TFT LCD display

 Battery voltage display, the EMS-3 can measure voltages up to 30V (Can be used in 12V and 24V vehicles)

and contains a programmable low/high voltage alarm to automatically catch alternator failures, drive belt

failures and bad batteries

 Hour meter display to determine actual engine running time with 1/10 hour resolution

 Built in service interval reminder based on vehicle ignition on time

 EGT (Exhaust gas temperature) can be displayed in degrees Celsius or degrees Fahrenheit from -100ºC

to 1200ºC (-148ºF to 2192ºF) and contains a user settable high alarm.

 Includes an EGT trend graph display

 Includes linearization of K or J Type thermocouple probes and is cold junction compensated for greater

accuracy

 4x Universal analog input channels that can be configured for pressure or temperature.

 Pressure sender measurement with user settable high and low alarm. Pressure sender inputs can be

from a Fuel, Oil, Manifold, Turbo Boost or an Auxiliary pressure sender.

 Temperature measurement with user settable high and low alarm. Temperature sender inputs can be from

an Oil, Coolant or an Auxiliary temperature sender.

 Oil Pressure warning alarm from oil pressure senders that have a switch output

 Coolant level absence/presence detection by the means of AC signal probe excitation. The EMS-3 can

use inexpensive probes such as stainless steel screws to determine the coolant level. The EMS-3 can also

be used with float level type sensors. The Coolant level detection circuit also has a programmable switch

time to prevent false alarm messages when driving over rough terrain

 Fan control output for on/off temperature control

 All senders linearized for additional accuracy

 Each sensor display can be individually enabled or disabled

 Includes an external audible alarm output (The sound can be turned on/off, for example game viewing)

 Dual external alarm outputs

 Ambient light sensor for automatic or manual backlight control

 On-board voltage reversal and over voltage protection for harsh vehicle environments

 Standard 2” (52mm) circular enclosure

 SMPS (Switch mode power supply) for use in both 12V and 24V vehicles

 Maximum values of all readings are recorded

 Easy to use menu system for user parameter setup

 Field upgradable firmware via the RS232 interface

 1 year limited warranty

MadMan EMS-3 User Manual

Questions and Answers: