Before testing - Fitting the ear tip on the probe 14
• Place the Ear Coupler with the red adapter over the right ear of the baby, and the Ear Coupler
with the blue adapter over the left ear of the baby.
Note · Make sure that the adapters face upwards.
1.6 Fitting the ear tip on the probe
• Select an ear tip that fits the patient's ear canal. Gently push the ear tip onto the probe tip, and
make sure that the ear tip rests firmly on the base of the probe.
Note · The probe can be used for both ears. If you suspect infection in one ear, exchange the eartip before
you continue testing on the other ear.
• You can now go to the actual test.
To Next Page
Loading...