Madsen AccuScreen PRO - 6 Transferring Data; From Accuscreen PRO to a PC; After Transfer

To Next Page

To Previous Page

Otometrics 27

6 Transferring data

6.1 From AccuScreen PRO to a PC

Transfer

Note · See the AccuLink on-line manual for instructions on how to transfer the data.

• Activate the AccuLink program on the PC and run the transfer operation from AccuLink.

Via cable

• Connect the cable from the AccuScreen PRO to the PC.

• Select "Transfer/Delete data" from the Main Menu followed by "Transfer via cable".

Via infrared

• Position the AccuScreen PRO with the infrared window at the top of the device facing the PC at

a distance of no more than 80 cm from the PC.

• Select "Transfer/Delete data" from the Main Menu followed by "Transfer via infrared".

6.1.1 After transfer

• When you have transferred data to AccuLink, delete the data from the AccuScreen PRO (see

Deleting data below).