Madsen AccuScreen PRO - 5 Printing; Printing a Report

Otometrics 23
5Printing
You can print complete results directly on a label printer.
Caution · Before you make any printouts, remove the probe from the patient's ear and detach all electrodes.
Note · Testing is not possible when the label printer is connected to the AccuScreen PRO.
Note · Do not switch off the AccuScreen PRO while printing is in progress. Doing so may result in distorted
test data.
5.1 Printing a report
1. Connect the label printer cable to the AccuScreen PRO and switch on the printer.
2. Select the "Print results" menu from the Main Menu.
3. Select the patient whose data you wish to print.
4. Check that you have selected the correct patient. Press OK when you have confirmed that the
data is correct. The "PRINT RESULTS" screen appears.
5. You can select different types of printouts on the "PRINT RESULTS" menu. Scroll and press OK
to select the type of printout.