Transferring data - From a PC to AccuScreen PRO 28
6.2 From a PC to AccuScreen PRO
• Connect the cable from the AccuScreen PRO to the PC. Activate the AccuLink program on the
PC and run the transfer operation to AccuLink.
• See the AccuLink on-line manual for instructions on how to transfer data to the AccuScreen
PRO.
6.3 Deleting data
If you have transferred data to AccuLink, for instance because the AccuScreen PRO memory is run-
ning full, you may want to delete the data in AccuScreen PRO.
• Select "Transfer/Delete data" from the Main Menu followed by "Delete data". This function
deletes all test data in the AccuScreen PRO.
• When you select the "Delete data" function, you are asked whether you really want to delete all
data. The cursor defaults on "No". Scroll to "Yes" and press OK to delete all data. The message
"All data cleared" appears on the display.
• After 5 seconds the program returns to the "TRANSFER/DELETE DATA" menu.
• When all data has been deleted, the message "No test data in memory" appears in the modes
"Select Patient", "Print results" and "View results".
To Next Page
Loading...