10.2. Semi - Automatic stopping of
playing a record
1. 2.6. 4. 5.3.
30 seconds after the tonearm reaches the end
of the record, the tonearm will lift itself and the
levitating platter will slowly stop rotating.
After the tonearm has lifted, move the tonearm
back into the tonearm rest.
When the levitating platter reaches the correct
speed and stabilizes, the light in control button
will stop blinking and the tonearm will lower
itself and place the stylus on the record.
The platter feet will automatically rise and hold
the levitating platter.
Move the control button anti-clockwise to OFF
mode.
Make sure to place it completely inside the
tonearm rest and not only above it.
29
To Next Page
Loading...