RESET
14. HARD RESET 15. TRANSPORTING AND SHIPPING THE TURNTABLE
REPEAT THE
STEPS 1 - 5 FROM
PREVIOUS CHAPTER
(13. RESET, PAGE 36 - 37).
REPEAT THE STEP 14.
HARD RESET
(PAGE 38)
Bottom view
2x
Press the reset button on the bottom of the
turntable body two times, quite fast (inside the
span of 1 second).
Turn the control button to the levitation mode
swiftly.
Using the product’s original packing materials,
wrap the turntable in the reverse order from
when you unwrapped it.
• Remove the power adapter from the turnta-
ble body. Carefully pull the plastic casing on
the connector to unplug it correctly and not
damage the connector.
• Remove the power cord from the outlet in
the wall.
• Unscrew the tonearm counterweight.
• Remove the anti-skating weight.
• Place the cartridge protector back onto the
cartridge.
• Use a provided cable tie to secure the to-
nearm to the tonearm rest.
• When the LED ring on the turntable body
stops blinking, it is safe to begin packing
the turntable.
NOT FOLLOWING THESE STEPS,
IT IS LIKELY THAT THE WARRANTY
WILL BECOME VOID.
WARNING
39
To Next Page
Loading...