13. RESET
1. 2. 3. 4. 5.
Make sure the control button is in OFF mode,
platter feet are raised and the levitating platter
is resting solidly on the platter feet.
Hold the levitating platter rmly with both
hands and remove it by lifting it vertically.
Make sure to place the removed levitating plat-
ter at least 50cm (20“) away from the turntable
body and away from any metal, magnetic or
electronic objects, to avoid damage to the ap-
paratus or other possessions.
Find the smaller inbus key provided or a small
pin for the next step.
With one hand or a help of a friend, lift the
turntable body from the left side and press the
reset button on the bottom of the turntable
body one time.
Lower the turntable body back on the surface.
The platter feet will begin to retract and move
into the turntable body.
Start using the turntable again.
Bottom view
WARNING
Remove the RCA cables from the
turntable body.
1:1
14
RESET
50 cm
/ 20“
37
To Next Page
Loading...