MAG-LEV audio ML1 - 1. Introduction; 2. Safety Precautions; General Safety Warnings

Thank you for purchasing this MAG-LEV Audio
product.
Read through this user manual before unpack-
ing, setting up and using this product to en-
sure its correct use. Also, keep this manual,
along with the warranty, for future reference.
Make sure that the operating voltage of the
product is correct for the country you live in.
WARNING: to prevent re or shock hazard, do not expose this apparatus to rain or moisture.
Caution:
Do not expose this apparatus to drips or splashes.
To avoid electric shock, do not open the cabinet.
Refer servicing to qualied personnel only.
Do not expose this apparatus to excessive heat such as sunshine, re or the like.
Do not subject this apparatus to strong impact.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall
be easily accessible.
In case of emergency, disconnect the power cord plug of this apparatus quickly.
Do not place any objects lled with liquids, such as vases, on this apparatus.
To prevent re, do not place any naked ame sources (such as lighted candles) on this apparatus.
Do not install this apparatus in a conned space such as a bookcase or similar unit.
Install this apparatus only in the place where ventilation is good.
Do not plug the apparatus in damaged outlets.
Do not expose any parts of this apparatus to any magnets.
For customers in the USA/Canada
CAUTION / RISK OF
ELECTRIC SHOCK
/ DO NOT OPEN
Caution: To prevent electric shock, do not remove
the cover. There are no user-serviceable parts inside.
Internal adjustments are for qualied professionals
only. Refer all servicing to qualied service person-
nel.
The exclamation point symbol within an
equilateral triangle is intended to alert the
user to the presence of important operating
and maintenance (servicing) instructions in
the literature accompanying the product.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magni-
tude to constitute a risk of shock to per-
sons.
1. INTRODUCTION
2. SAFETY PRECAUTIONS
1. INTRODUCTION 03
2. SAFETY PRECAUTIONS 03
3. NOTES ON USE
3.1. Turntable body
3.2. Cartridge
3.3. Platter
3.4. Counterweight
3.5. Tonearm
06
4. PACKAGE CONTENTS 07
5. PART NAMES AND FUNCTIONS
5.1. Overall diagram
5.2. Tonearm
08
6. PREPARING THE SURFACE / SPACE 10
7. UNPACKING 13
8. SETTING UP THE TURNTABLE 17
9. SETTING UP THE TONEARM
9.1. Setting up the vertical tracking angle
9.2. Setting up the anti-skating weight
20
10. PLAYING A RECORD
10.1. Playing a record
10.2. Semi - Automatic stopping of playing a record
10.3. Manual stopping of playing a record
10.4. Turning, changing or removing the vinyl record
10.5. Levitation Mode / Levitating the levitating
platter
10.6. Dust cover *
10.7. UPS (Uninterruptible Power Supply)
26
11. CARE
11.1. Turntable body
11.2. Platter
11.3. Stylus tip
11.4. Placemat
33
12. REPLACING A CARTRIDGE 34
13. RESET 36
14. HARD RESET 38
15. TRANSPORTING AND SHIPPING THE TURNTABLE 39
16. SPECIFICATIONS
16.1. Dimensions
16.2. Turntable specications
16.3. Tonearm specications
16.4. Cartridge specications
41
17. TROUBLESHOOTING 42
Index
03