LEAVE THE PLATTER INSIDE THE
TOP PART OF THE STYROFOAM
BOX, UNTIL YOU HAVE SET UP
THE TURNTABLE AND YOU ONLY
HAVE LEFT TO PLACE THE PLAT-
TER ON THE TURNTABLE FEET
(PAGE 18).
When taking out or handling the platter, grip
with both hands and always keep it away from
any metal or magnetic object, cellphones, tvs
or any other electronic equipment. (minimum
50cm or 20“ distance)
11.
BEFORE SETTING UP THE PLATTER ON
RAISED PLATTER FEET READ PAGE 18.
12.10.
After purchase, we suggest that you save all
packaging materials for possible future stor-
age, moving, or shipping.
Warranty and returns are valid if sent back in
the original packaging and packed properly.
Follow the instructions in case of repacking
(page 39).
Before connecting the power adapter,
make sure the power adapter is suitable
for the voltage in your country.
Plug in the power cord directly to
the outlet.
Do not use extensions or dividers.
1. 2. 3.
Place the turntable body (2) on the
pre-prepared surface.
THIS PRODUCT REQUIRES SOME ASSEMBLY BEFORE USING IT FOR
THE FIRST TIME. DO NOT CONNECT THE POWER CABLE UNTIL
ASSEMBLY IS COMPLETE.
8. SETTING UP THE TURNTABLE
WARNING WARNING
REMOVE THE PROTECTIVE
FOAM SHEET/BAG.
Follow the instructions on the next page to
connect the turntable properly.
Schematic visualisation on page 16.
MAKE SURE THE
OUTLET YOU WISH
TO PLUG THE
APPARATUS IN, IS
IN GOOD
CONDITION.
50 cm
/ 20“
15
To Next Page
Loading...