Take out the box with the tonearm weight. Take out the small bag with tools and
anti-skating weight.
Take out the body of the turntable with both
hands and place it at least 30cm (1 foot) away
from the platter (top part of the Styrofoam box).
4. 5.
REMOVE THE PROTECTIVE
FOAM SHEET/BAG.
6.
Place it at least 30 cm from the package. Take out the box in the middle with the power
adapter inside. (brown box)
Take out the power cord.
Remove the circular Styrofoam part from the
middle.
7. 8. 9.
MAKE SURE IT IS
THE RIGHT POWER
CORD FOR YOUR
COUNTRY!
30 cm
/ 12“
13
To Next Page
Loading...