16
Editing a Landmark
Following the instructions under Viewing a Landmark, use the
LEFT/RIGHT arrows to select the landmark you wish to edit.
Press the UP ARROW until the screen displays PRESS ENT
TO EDIT, then press
ENTER
.
You can modify the landmark name and/or the coordinates for
the landmark by using the UP/DOWN arrows to change the
information and press
ENTER
to move to the next line. If
the landmark you are editing is used in a route, the route will
be modified to reflect the changes you made to the landmark.
Deleting a Landmark
Following the instructions under Viewing a Landmark, use the
LEFT/RIGHT arrows to select the landmark you wish to
delete.
Press the UP ARROW until the screen displays PRESS ENT
TO DELETE, then press
ENTER
. Use the LEFT/RIGHT
ARROWs to confirm (YES or NO) and press
ENTER
.
If the landmark is used in a route or is the destination
landmark in a GOTO route, the GPS 310 alerts you
that the landmark cannot be deleted. Remove the
landmark from the route and repeat.
To Next Page
Loading...
Need help?
General