Indicators status is as follows.
PWR (Power)
IN (HDMI/SDI)
LIVE
ETH
Wi-Fi
Multiple indicators flash:
Indicators
On: power on.
■
Off: power off.
■
On: input signal detected.
■
Off: input signal undetected.
■
On: the encoder is streaming to at least one streaming address.
■
Breathing: none of the live sessions is enabled.
■
On: Ethernet connected.
■
Off: Ethernet unconnected.
■
On: Wi-Fi connected.
■
Off: Wi-Fi unconnected.
■
All but PWR indicator lights flash once simultaneously: system is booting up
or rebooting.
■
The indicator lights flash in turn from IN to Wi-Fi: firmware is updating.
■
If any other status appear, please try to unplug and re-plug in the
power cable to recover your encoder.
To Next Page
Loading...
