Online Update
By default, the function is on. When a new version is detected, a icon will
flow on the control pane.
1. Turn on switch, and the online update function is on. The unit would
detect the latest released firmware automatically when connecting to the
Ethernet.
2. Click icon to check for the latest firmware manually.
3. Click Update button to download and install the new version file if any.
Do not disconnect from the power source or perform any operation while
updating the firmware as this could damage your gear.
After a successful update, the device will restart automatically.
4. Verify: click checking for updates again.
"Your firmware is up to date." indicates the update is successful.
To Next Page
Loading...
