Magewell Ultra Encode - Frequently Asked Questions (FAQ); AP Mode Control; Live Broadcast Encoding Formats; Multi-Destination Streaming Capabilities

How to turn on/off AP mode
AP mode is on by default. You can go to Network > AP section to turn
on/off the AP mode and change AP password.
What is the encoding format for live broadcast?
Two data encoding methods for main stream: CBR(constant bitrate) and
VBR(variable bitrate) - which can be modified in the WebUI > Encoding
Parameters, and CBR for sub stream which can not be changed.
Can Ultra Encode stream to multiple destinations at
the same time?
Can I set one live stream server to use the main stream
and the other to use the sub stream?
Yes. You can select the main stream or sub stream for each session.
FAQ
Allow simultaneous sessions over the same streaming protocol.
■
Up to 6 sessions of TS over RTP and TS over UDP simultaneously.
■
Up to 6 sessions of SRT Caller and SRT Listener simultaneously,
containing one SRT Listener session at most.
■
Up to 6 sessions of RTMP and RTMPS simultaneously. It means that as
long as the destination server allows, RTMP/RTMPS video platforms
such as Twitch, Facebook, YouTube can be streamed to at the same
time with your accounts.
■
Stream only 1 session of HLS (push), RTSP, or NDI HX (NDI|HX2).
■
58