Manual Update
1. Click on click to update to select the .mwf firmware update file from your
local storage, or just drag and drop the file from your computer into the
upload zone.
Dowload firmware file from our official website.
The device will automatically verify the update file and upload the file after
the file verification is passed.
2. Click Update to download and install the new version file. Then the device
will reboot to complete the update.
Do not disconnect from the power source or perform any operation while
updating the firmware as this could demage your gear.
3. Verify: check the Firmware version in Dashboard or Firmware tab. It
should be the same as your target version number.
To Next Page
Loading...
