SURFACECOOKING
COOKTOP SURFACEBURNERS LIGHTINGSURFACE
TOremoveceoktop:When cool, first All surfaceburnersare securedin BURNERS
remove grates and drip bowls, if place during transportation with
equipped. Grasp two front burner either a shipping screw or a spring Your rangeis equippedwith pilotless
wells and lift up. clip.Oncetherangeis installed,these ignition which eliminatesthe con-
mustbe removedto allowquickand stantstandingpilot.
Thetop can becompletelyremoved easyremovalof theburner. To lightburner:
of, if equippedwitha metalsupport 1.Placeutensilonburnergrate.
rod,canrestontherod.Supportrod Toremovetheonepieceunlburner: 2. Pushinand turnknobto theLITE
is locatedacrossthe front of the position.A clickingsoundwill be
burnerbox. heard and the burnerwill light.
Aftertheburnerlights,turnknobto
the desiredflame size.
I
Allowburnertocool.Lift cooktop.To
removeuniburner,lift upslightlyand
pullout.Undernocircumstancesare If flame shouldgo out during a
BURNER GRATES burners to be taken apart for cooking operation,turn the burner
Your range will be equippedwith cleaning, off. iF GASHASACCUMULATEDAND
A STRONGGASODORIS DETECTED,
eitherroundor squaregrates. Toremovestandardsingleburner: WAIT5 MINUTESFORTHEGASODOR
TO DISAPPEARBEFORERELIGHTING
CAUTION:Burner grates must be __ BURNER.
properlypositionedbeforecooking. _ ,___ OPERATINGRANGEDURINGA POWER
Whenreinstallingroundgrates,place __ FAILURE
pinsin slotssogratesstayinplace. 1.Holda lightedmatchtothedesired
surfaceburnerhead.
__ 2.Turnknobto LITE.Theburnerwill
thenlight.
3.Adjust the flame to the desired
level.
Removeor support cooktop.Grasp
burner headand tilt to releasetab CAUTION:When lighting surface
from slot near igniter. Lift up and burners,besureall controlsareinthe
toward back of cooktop until air OFFposition. STRIKEMATCHFIRST
shutter end of burner releasesfrom and hold in position beforeturning
When reinstalling square grates, valve, knob on.
place indented sides together so
straightsidesare at front and rear.
6
To Next Page
Loading...
Need help?
General
