Do the power supply voltage and frequency requirements meet with those of the location
(110V/220V)? Are all wires linked correctly and securely connected to each other? If coupled in an
incorrect manner, the connection will not be made accurately and it could cause not only
irreparable damage to the machine, but also is a potential fire hazard. DO NOT INSERT
CONNECTORS FORCIBLY.
Check that the all the cables, including power cables, are undamaged. Do power cables or other
wires have any splices, cuts, or dents?
Have you been provided with all of the associated accessories?
Can all doors/lids be opened with the accessory keys? Can doors/lids be firmly closed? Does the
coin box key open the coin box(es)?
3. SETUP & INSTALLATION
Refer to IMPORTANT SAFETY INSTRUCTIONS for places to avoid
Place the unit on dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by wall.
3.1 MARQUEE ASSEMBLY
To Next Page
Loading...