9
WARNINGS
The user will nd all the documentation required by law for the sale of FLEX on the
www.magicmotorsport.com website. It is possible to request the documentation in
paper format by contacting customer service.
MAGICMOTORSPORT CANNOT BE HELD LIABLE IN ANY CASE FOR ACCIDENTS OR
DAMAGES RESULTING FROM AN IMPROPER USE OF THE PROGRAMMING TOOL,
AS WELL AS THE NON-COMPLIANCE, EVEN PARTIAL, OF THE SAFETY RULES AND
TERMS AND CONDITIONS OF USE IN THIS DOCUMENTATION..
Specically:
• It is absolutely forbidden to make any modications to the product. Any
damage to people, animals or things resulting from use of the programming
tool improperly modied by an unauthorized user relieves the manufacturer
of any responsibility;
• Store this manual carefully as it is necessary for a correct and safe use of the
programming tool;
• Periodically check the status of the installed label and restore it if it is
damaged. If necessary, the user may contact the manufacturer’s authorized
assistance;
• If the external structure of the programming tool presents sharp edges
as a consequence of an accidental impact, rendering it dangerous, it is
TRANSACTIONS INVOLVING RISKS FOR THE OPERATOR
During commissioning operations, the user must comply with the general
accident prevention regulations.
Specically:
MAKE SURE ELECTRICAL PARTS ARE NOT LIVE BEFORE PROCEEDING TO WORK.
Solutions were adopted in the development stages of FLEX that were aimed
at rendering the use of the tools safe in all phases of use: transport, adjustment,
activity and maintenance. However, not all risks for operators and the environment
have been eliminated both for technological reasons (reliability of the devices) and for
management reasons (excessive diculties in elimination). Consequently, the residual
risks present in the tools are hereby reported.
To Next Page
Loading...
