49
7. FREQUENTLY ASKED QUESTIONS -F.A.Q-
1. What is the dierence between a MASTER and SLAVE tool?
Master
The FLEX Master tool has no limitation of le formats. The Master user works with
plaintext les and .bin formats that are both editable with any type of software.
Furthermore, the Master has the possibility to use the le modication services oered
by MAGICMOTORSPORT and has access to 300 free Green coins per month and
benets from full MMS Tech Support.
Slave
The FLEX SLAVE tool can only work with encrypted les and therefore the user does
not have the ability to access the content and cannot edit it. Any types of modication
required by the Slave user must be forwarded to their Master who can encrypt and
decrypt their les.
The Slave tool must be linked to a Master one. This Master can either be chosen by
the Slave user or be recommended by MAGICMOTORSPORT based on the general
geographical area of the Slave user.
Once the Master has been chosen, the Slave user will be exclusively linked to that
Master for any operation that requires the modication of les. The Slave user benets
from basic MMS Tech Support and all support requests must rst be handled by their
Master.
2. How do you manage a SLAVE network?
To manage a Slave network, the Master is required to purchase a Slave le decrypting
module for his MMS Helpdesk account through which they will be able to encrypt and
decrypt the les submitted by their Slaves.
It is possible to manage up to a max of 99 Slave users with one module. Once the limit
has been exceeded, the Master must purchase a second module.
3. Is it possible to change MASTERS?
A Slave user can change their Master without incurring any fees. However,
MAGICMOTORSPORT must receive written authorization from the current Master
before proceeding to release the Slave.
The Master can send this communication via email at info@magicmotorsport.com or
a Sales Dept. ticket in the MMS Helpdesk and specify the serial number of the Slave
tool to be released.
To Next Page
Loading...
