11
All products are tested and ne-tuned by the manufacturer before shipping and
delivery to the customer.
The product has been designed, manufactured and tested to meet all specic
standards when congured correctly as per the declaration of conformity.
If the conguration, use and/or maintenance of the tools are not carried out in a
workmanlike manner, anomalies and safety issues may occur during use. Improper
conguration and maintenance will void the warranty terms.
Before conguration and powering on the tools, it is necessary to completely remove
any protective or packaging materials.
THE PROGRAMMING TOOL CAN ONLY BE POWERED ON AFTER IT HAS BEEN CORRECTLY
CONFIGURED.
To Next Page
Loading...
