15
Maintenance of FLEX
Unplug the power cord before cleaning FLEX. Use an antistatic
cloth, moistened with a solution of non-abrasive detergent
and a few drops of warm water, then wipe with a dry cloth.
Remove any form of moisture from FLEX with a dry cloth.
Do not use aggressive solvents such as: thinners, benzines or other
similar chemicals on or near FLEX.
Do not place objects on FLEX.
Do not expose FLEX to liquids, rain and humidity.
Do not store FLEX in dusty environments.
Do not use FLEX near gas leaks.
To Next Page
Loading...
