ID Card Printer – User Manual
4
GENERAL INFORMATION:
This document contains proprietary information belonging to Magicard Ltd. and may not be wholly or partially copied, stored in a data
retrieval system, or used for any purpose other than that for which it was supplied, without the express written authority of Magicard
Ltd. All rights are reserved.
The HoloKote feature is protected by US PATENT No: 5,990,918 and by EUROPEAN PATENT SPECIFICATION EP 0 817 726 B1.
Microsoft and Windows Vista and Windows 7, 8 and 10 are trademarks of Microsoft Corporation.
Copyright © 2011 Magicard Limited.
Magicard Ltd. shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing,
performance or use of this material. Magicard Ltd. reserves the right to change the content of this document without prior
notification.
SAFETY INSTRUCTIONS:
• To prevent electric shock do not remove covers.
• Do not attempt to service the printer yourself.
• There are no user serviceable parts inside (either printer or dye film). In the event of malfunction, contact your
printer/consumable supplier.
• This product is only to be used with the Power Source supplied at point of purchase.
• Take care not to spill any liquid on the printer.
• When handling the printer avoid touching the printing edge of the Thermal Print Head. Any grease and
contamination will shorten its life.
• Before transporting the printer, remove dye film & card hoppers and pack the printer in its original packaging to
reduce the likelihood of damage in transit. Magicard is not responsible for printers/items inadequately packaged.
CAUTION
Unapproved changes or modifications to the equipment could void the User’s authority to operate the printer and affect
any related warranty claim.
If using this printer in Germany:
To provide adequate short-circuit protection and over-current protection for this printer, the building installation must
be protected by a 16 Amp circuit breaker.
Bei Anschluß des Druckers an die Stromversorgung muß sichergestellt werden, daß die Gebäudeinstallation mit einem
16 A-Überstromschalter abgesichert ist.
To Next Page
Loading...
