12
Set-up (continued)
Compact IC unit (sold separately)
Please ask your dealer for the Compact IC unit
connection.
1.
Connect the compact IC unit to the host
computer.
Connect interface cables which are commercially
available.
Connecting the power cord
1.
Check the plug.
䢇Dark gray 䢇For AC220-240V type
For AC 120V type (Europe)
(North America)
2.
Plug the power cable into the printer.
Always use a grounded power
outlet. Never share the outlet with other electrical
equipment.
Use an AVR (Automatic Voltage Regulator) if there
is a possibility of voltage fluctuation. Use an
uninterruptible power source rather than an AVR if
there is the possibility of uninterruptible power
source.
Interface cable
(Commercial item)
CAUTION
To Next Page
Loading...
