Magicard ID Card Printer - Specifications; Main Specifications

46
Specifications
Main specifications
Recording method : Sublimation type retransfer
Feed format : Automatic feed
Recording density : 300 dpi
Expression gradation : 256 gradations for each color
Printing time : Approx. 29 seconds (for single-
sided printing, excluding data
transfer time)
Interface : Compliant with SCSI II (standard)
Operating environment conditions
Temperature: 15°C ~ 30°C
Humidity: 35% ~ 70% (no
condensation)
Storage environment conditions
Temperature: -15°C ~ 55°C
Humidity: 20% ~ 80%
Power supply : 100~120ACV/220~240ACV
(allowance±10%)
Current dissipation : 7.0A (for 100V system)/5.0A (for
200V system)
Mass : Standard 22kg
Excluding the built-in magnetic
encoder
Accessories : Power cable for 120ACV ......... 1
Dark gray (North America)
for 220 ~ 240ACV .................... 1
(Europe)
Cleaning card ×1
Instruction manual English ×1
Card stacker ×1
Ink ribbon cassette ×1
Retransfer film cassette ×1
Ferrite core ×2
(Standard model: 1 unit, built-in
IC encoder model: 2 units)
Binder ×4
(Standard model: 2 units, built-in
IC encoder model: 4 units)
Jog lever (contained in the
card tray) ×1
CX21ICL Series (Large-type IC unit)
Power supply : Fed from the printer.
DC 5V±5%, DC 12V±5%, DC 24V±5%
Current dissipation : 500mA, 300mA, 1A
Mass : 3.5kg
Dimension (mm) : 110(W) × 221(D) × 255(H)
Accessories : Joint plate × 1
Inter-unit cable × 1
CX21ICS Series (Compact IC unit)
Power supply : Fed from the printer.
Mass : 0.5kg
Dimension (mm) : 50(W) × 152(D) × 115(H)
Accessories : Screw (with washer) × 3
Screw (without washer) × 2
The specifications and external appearance of this product are subject to change for improvements
without a prior notice.
Products sold separately
: Ink ribbon, retransfer film
1,000 frames/set
: Cleaning card
10 cards/set
Model: CX210-CC1
: Compact IC unit
Non-contact IC encoder
: Large-type IC unit
Mounts either a Non-contact or
contact IC encoder.