CLEANING
10
Auto-clean
Immediately after use: Pour one litre of lukewarm water and a few drops of
washing-up liquid into your blender jug. Close the lid carefully and run for 30
seconds at speed 3. Rinse thoroughly.
Total clean
If necessary, you can unscrew the top
of the measuring cap.
Always check the safety locking pins.
If they do not move freely, clean them
with a damp sponge.
The blender jug and the mill bowl
are both dishwasher safe.
Clean the base with a damp cloth.
Never immerse the motor unit in
water.
For the very best results, we recommend
washing the lid and the seals by hand.
Detach the blade assembly holder
with the safe-stir spatula. Remove all
pieces including the seal.
Always unplug your appliance
before cleaning it. Remove all the
detachable parts, not forgetting
the seals.
*
To Next Page
Loading...
