USING YOUR BLENDER
7
*
Select a speed or setting and press ON.
The indicator light will come on.
Use the spatula to push the ingredients
down or to facilitate the blending of
thick mixtures.
*certain models only
Press Stop to halt the blender. Turn
the selector to 0 to switch it off.
Never remove the lid while your blender is running.
To add ingredients during operation, either remove the measuring cap or stop
the machine first, then open the lid.
When processing hot liquids, remove the measuring cap to allow any steam
to escape.
Never run the blender if the jug is empty. To avoid damaging your blender
jug blades, chop or grind dry ingredients (e.g. nuts or spices) in the mill
attachment*, which is fitted with a purposely designed blade assembly.
To make sure that your blender has as long a lifespan as possible, never run it
continuously for more than 60 seconds at a time.
When using the variable speed control, always start off at the lowest speed,
gradually increasing it until you reach the right speed for your task.
Position the lid and press it down
firmly. Insert the measuring cap.
Connect your blender to the mains
supply.
7
9
8
10
2
1
To Next Page
Loading...
Need help?
General
