Magnavox 32MD251D User Manual

L
R
S-VIDEO
VIDEO
HDMI
S-VIDEO
R
L
Y
Pb
Pr
VIDEO
R
L
Y
P
b
Pr
Pr
VI
D
E
O
R
L
AC IN
HDMI
S-VIDEO
R
L
Y
Pb
Pr
VIDEO
R
L
Y
Pb
VIDEO
R
L
AC IN
L
R
S
-
VI
D
E
O
VI
D
E
O
L
R
S
S
VI
E
O
VI
D
E
E
O
O
O
35
Connect Accessory Devices
Recorder (VCR-DVD+RW)
Note: Do not place your recorder too close to the TV screen. Some
recorders may be susceptible for signals from the display. Keep recorders
a minimum distance of 20” from the screen.
There is a wide range of audio and video devices that can be connected to your TV. The following
connection diagrams show you how to connect them to the TV.
DVD (AV1)
YPbPr, VIDEO and L/R Audio, (For integrated DVD only)
AV2 YPbPr, VIDEO and L/R Audio,
AV3 VIDEO, S-VIDEO, L/R Audio and Digital Audio out (SPDIF OUT)
Side VIDEO, S-VIDEO, L/R Audio and Headphone
.
HDMI
75
Don’t insert any cable here. This area is for repair center use only.
Connect the RF Antenna or Cable TV cable (eventually through
an optional two-way signal splitter and/or Cable TV converter
box) to the RF IN socket of your
recorder.
Connect another RF cable from the output OUT of your
recorder to the TV’s CABLE/ANTENNA 75 jack.
For
better playback quality for stereo device only, also connect
the Video, Audio Left and Right (only for stereo devices) AV
cables to the VIDEO, AUDIO L and R input jacks of AV3.
If your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable to the
S-VIDEO input instead of connecting the recorder to the
VIDEO jack of AV3. S-Video does not provide audio, so audio
cables must still be connected to provide sound.
OUT
AV3:
L + R + VIDE
O
HDMI
Pb
Y
Pr
VIDEO
R
L
Y
Y
P
P
b
Pr
VIDE
O
R
L
S-VIDEO
R
L
3
CABL
E
IN OUT
2
ANTENNA
1
2
3

Magnavox 32MD251D Specifications

Display

LCD WXGA display resolution	1366 x 768p
Aspect ratio	16:9
Brightness	500 cd/m²
Contrast ratio	800:1
Viewing angle (H / V)	176 / 176 degree
Response time (grey to grey)	8 ms

Power

Power consumption	< 135 W
Standby power consumption	< 1 W
Mains power	90-240 VAC, 50/60 Hz

Sound

Output power (RMS)	2 speakers @ 10w each
Sound System	Mono, SAP, Virtual Dolby Surround
Ambient temperature	5 °C to 40 °C

Connectivity

AV 1	Audio L/R in, CVBS in, YPbPr
AV 2	Audio L/R in, CVBS in, YPbPr
AV 3	Audio L/R in, CVBS in, S-Video in
Front / Side connections	Audio L/R in, CVBS in, S-video in
Rear Connections	Antenna F-type, Headphone out 3.5 mm jack
Other connections	HDMI, S/PDIF out (coaxial)

Weight and Dimensions

Product weight (+stand)	19 kg
Product weight (+stand) (lb)	41.9 lb
Set dimensions with stand (W x H x D)	925 x 565 x 271 mm
Set dimensions with stand in inch (W x H x D)	36.4 x 22.2 x 10.7 inch