30 Clock (VCR)
Follow these steps to set the VCR clock. Make sure:
● The System is on and in VCR mode. Press VCR so the red VCR
light appears on the front of the System.
1
Press DISC/MENU. If the clock has never been set, the
CLOCK SET menu will appear. Go to step 3.
2
Press o or p to select CLOCK SET, then press B.
3
While the MONTH space is flashing, press o or p
until the month appears. Then, press B.
4
While the DAY space is flashing, press o or p until
the day appears. Then, press B.
5
While the YEAR space is flashing, press o or p until
the year appears. Press B. The day of the week will
appear automatically.
• To check the time, press DISPLAY
until the time appears on the TV
screen.
• Power failures of more than 30
seconds can erase the clock
setting.
Helpful Hints
To Next Page
Loading...
Need help?
General
