Clock (VCR) (cont’d) 31
6
While the HOUR space is flashing, press o or p until
the hour appears. Then, press B.
7
While the MINUTE space is flashing, press o or p
until the minute appears. Then, press B.
8
While the AM or PM space is flashing, press o or p to
select AM or PM.
Your selection will flash on the screen in the AM/PM space.
9
Press C-RESET/CLEAR or B to start the clock.
• To reset the clock, follow steps 1-2
on page 30. Select the information
you want to change using B or
s.When the information is
flashing, use o or p to enter the
correct information. Press
C-RESET/CLEAR to set the clock.
Helpful Hints
To Next Page
Loading...
Need help?
General
