3 - Operation
tDynamo| Three-way Secure Card Reader Authenticator | Installation and Operation Manual
Page 32 of 39 (D998200257-20)
3.5.2 How to Swipe Magnetic Stripe Cards
Cardholders should swipe magnetic stripe cards in the MSR swipe path, indicated by the bidirectional
MSR swipe symbol shown on the device’s face. The magnetic stripe must face toward and into the
device, as shown in Figure 3-2. Cardholders may swipe in either direction along the path.
Figure 3-2 - Swiping a Card Through tDynamo
To Next Page
Loading...
