8-6
© Copyright Mahindra & Mahindra Ltd.012016
Rotate the outer rotary switch on the lighting control stalk aligning
the ‘dot’ on the switch to the ‘1st détente’ position on the stalk to
switch ON the parking lamps.
The tail lamp, license plate lamp, front park lamp and
instrument panel illumination lamps are activated when the
parking lamp is switched ON.
8.4.4 Head Lamp ON
Rotate the outer rotary switch on the lighting control stalk aligning
the ‘dot’ on the switch to the ‘2nd détente’ position on the stalk to
switch ON the head lamps.
8.4.5 Head Lamp High Beam/Low Beam
A Low Beam B
High Beam
With the head lamp low beam ON, push the lighting control stalk
down (away) from steering wheel to switch ON the head lamp high
beam. The head lamp high beam telltale lamp in the instrument
cluster illuminates indicating high beam option selected. For low
beam, pull the stalk back up.
Your vehicle head lamps are vented and moisture may be
collected on the inside of the head lamp lens under certain
climatic and geographical conditions. This moisture will
evaporate once the head lamps have been switched ON for a
few minutes.
FEATURES AND CONTROL
To Next Page
Loading...
Need help?
General
