Mahindra BFMXTV60 - Caster Wheel Assembly Procedure

7
ASSEMBLY
Install the two front wheels forks (item 5) with the
bolts(item6),nyloninsertlocknuts(item7)andthe
washer(item9)alreadyinplace.
Insert the lock pins (item 8) into place to lock the
wheels.
Lockthetwofrontwheelswhen:
 Transportingbetweenmowingzones.
 Mowingathighspeed.
 Mowinginasectorthatdoesnotrequiretightturns.
STEP2
CASTERWHEELASSEMBLY
Install the two rear wheels forks (item 1) with two
spacers (item 2), two hex bolts 3/8’’ n.c. x 3
1/4’’(item3)andtwonyloninsertlocknuts(item4).
Install the four wheels (item 1) in the wheel forks
(item2)withthehex bolts3/4’’n.c. x 6 1/2’’(item3)
andthethinnyloninsertlocknuts(item4).
Make surethere is a slight play between the wheel
fork and the bearings, this will guarantee the wheel
bearingsarenottootight.Makesurethewheelturns
freelyaftercompletingtheassembly.
9