Mahindra BFMXTV60 - Tow Bar Assembly and Adjustment

8
ASSEMBLY
Centralposition:
Putthetowbarinplace(item1)withthehelpofapin
(item2)andthelynchpin(item3).
NOTE: the length of the tow bar (item B) is
adjustable. Remove the pin (item 7) and adjust the
lengththenreinstallthepin.
STEP3
TOWBARASSEMBLY
WARNING
RISKOFGETTINGPINCHED
TOPREVENTINJURIES:
Handlewithcareandneverleavethetowbar
(itemB)intheraisedposition.
Ajustableoffset
Leftorrightoffsetposition:
Remove the lock pin (item 4) and remove the pin
(item5). Pull out theextension arm (item2). Secure
the extension arm in place with the lock pin (item 6)
that is found on the other side of the frame(original
locationnotshown).Installthetowbar(item1)tothe
extension arm with the pin (item 5) and the lock pin
(item4).
Leftorrightpartialoffsetposition:
Removethelockpin(item4)fromtheframe(item8),
insert the pin (item 5) in the tow bar (item 1) then
secureinplacewiththelockpin(item4).
Partialoffset
8
Central
2
B
A
1
3
7