Mahindra USA, Inc. All Rights Reserved.
7-1
7 Important On-Product Labels
Replacement labels can be requested from a ROXOR authorized
dealer with a registered Product Identification Number (PIN).
Removal of, or tampering with any of these important on-product
labels is highly discouraged by Mahindra. Removal of these labels
may result in operators missing critical safety instructions which
may result in severe injury or death.
A person who knowingly removes, obliterates, tampers with, or
alters the Product Identification Number (PIN) on the ROXOR, with
intent to further the theft of it pursuant to the Motor Vehicle Theft
Prevention Act, shall be fined under this title, imprisoned not more
than 5 years, or both.
7.1 ANSI Labels
The labels in this section are to comply with the requirements set
forth by the American National Standards Institute (ANSI),
specifically standard ANSI Z535.4-2007.
The ROXOR is delivered with several labels containing important
safety information. Some of these labels are affixed to the ROXOR
for the safety of the operator, passengers and bystanders. They
need to be clean and visible at all times. If missing or damaged,
they need to be replaced. Replacement labels are free of charge
and can be requested from a ROXOR authorized dealer with a
registered Product Identification Number (PIN).
Any hang tags shown in this section should only be removed by the
ultimate consumer after purchase. Any person who operates, or is
a passenger in the ROXOR should read and understand the
information contained in the on-product labels before riding.
Important On-Product Labels
To Next Page
Loading...
